中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 3488.4-2022 硬质合金 显微组织的金相测定 第4部分:孔隙度、非化合碳缺陷和脱碳相的金相测定(中英文版) Cemented carbide - Metallographic determination of microstructure - Part 4: Metallographic determination of porosity, non-combined carbon defects and decarburized phases |
|||
GB/T 40067-2021 碳化钨粉末微观组织及缺陷检测方法(中英文版) Microstructure and defect determination of tungsten carbide powder |
|||
GB/T 3488.3-2021 硬质合金 显微组织的金相测定 第3部分:Ti(C,N)和WC立方碳化物基硬质合金显微组织的金相测定(中英文版) Hardmetals—Metallographic determination of microstructure—Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals |
|||
YS/T 1475-2021 锆及锆合金高低倍组织检验方法(中英文版) Microstructure test method of zirconium and zirconium alloy{译} |
|||
GB/T 38720-2020 中碳钢与中碳合金结构钢淬火金相组织检验(中英文版) Microstructure examination of medium-carbon steel and medium-carbon alloy structural steel after quenching |
|||
GB/T 5168-2020 钛及钛合金高低倍组织检验方法(中英文版) Microstructure and macrostructure examination for titanium and titanium alloys |
|||
GB/T 5594.8-2015 电子元器件结构陶瓷材料性能测试方法 第8部分:显微结构的测定方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 8: Test method for microstructure |
|||
DL/T 1422-2015 18cr-8ni系列奥氏体不锈钢锅炉管显微组织老化评级标准(中英文版) The gradational standard of microstructure aging for 18Cr-8Ni serials austenitic stainless steel boiler tubes |
|||
GB/T 3488.1-2014 硬质合金 显微组织的金相测定 第1部分:金相照片和描述(中英文版) Hardmetals―Metallographic determination of microstructure―Part 1:Photomicrographs and description |
|||
GB/T 3246.1-2012 变形铝及铝合金制品组织检验方法 第1部分:显微组织检验方法(中英文版) Inspection method for structure of wrought aluminum and aluminum alloy products Part 1 : Inspection method for microstructure |
|||
TB/T 3212.1-2009 机车车辆用低合金铸钢金相组织检验图谱 第1部分:b级铸钢、b+级铸钢(中英文版) Metallographic atlas for metallographic microstructure examination of low alloy cast steel for rolling stock. Part 1: Grades B and B+ cast steel |
|||
GB/T 5168-2008 α-β钛合金高低倍组织检验方法(中英文版) Microstructure and macrostructure examination for α-β titanium alloys |
|||
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|||
GB/T 11354-2005 钢铁零件 渗氮层深度测定和金相组织检验(中英文版) Determination of nitrided case depth and metallographic microstructure examination for steel iron parts |
|||
QC/T 281-1999 汽车发动机轴瓦铜铅合金金相标准(中英文版) (Car engine bearing copper-lead alloy microstructure standard) |
找到:15條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |